Advantages of the bubbler:
Water saving, mainly through multi-layer filters
 Buffered water flow, concentrated water column, mixed air to increase water contact area and constant water flow
 and so on. In the scene, the water column of the faucet without the bubbler is scattered, it is not easy to contact with the hand or the contact surface is small, and the water is too large to cause waste; the bubbler with a touch switch (solid) can quickly block the water flow to further save water (45 %)
; The bubbler with adjustable water flow can forcibly limit the amount of water and save water (35 ~ 85%)
Prevent splashing, the water column after buffering is even, and the water column reduces the splash vertically;
Hygienic, multi-layer filter can filter most of the sediment and impurities, and the bubbler with touch switch reduces contact with the faucet;
Constant water flow / water output, with pressure compensation or current limiting device (common in showers), can guarantee a certain water output when the water pressure is too low, limit the water output when the water pressure is too high, and stabilize the output when the water pressure is unstable Water volume
Working principle of faucet bubbler:
1. The bubbler is a device installed at the water outlet of the water nozzle to mix (increase) air when the water is discharged. The hand feels more comfortable when washing your hands, but it is inferred from this-“It can fully mix the flowing water and air, reduce the pressure of the effluent, and increase the scouring force of the water, thereby effectively reducing the use of water the amount”. It is really irresponsible, and extremely irresponsible (I hope that the experts who put forward this point of view did not make it clear or were simply misunderstood by us).
From the perspective of the principle of fluid continuity, the bubbler essentially reduces the spray speed of tap water, weakens the impact force, and reduces the impulse (experts also acknowledge that the water pressure of the outlet water is reduced).
The essence of decontamination and washing is force. Water is only a material carrier for transmitting force. The only way to improve the efficiency of water use is to strengthen and increase the water impulse and particle impact force. The bubbler can only slow the water flow rate and reduce Tap water has large impulse and particle impact force. Therefore, after installing the bubbler, it is impossible to save water (you can experiment and compare whether you need more water and draw your own conclusions).
2. The faucet bubbler is to change the “pipe flow” of the water to “line flow” at the outlet of the faucet, and then change the “line flow” to “jet flow” by the pressure of air, and then pass the “water separation” Beat well with water to make it soft. The pressurization through the air powers the water and reduces the flow of water without affecting the use. It can reduce water charges, reduce energy consumption, and reduce sewage discharge.
The water-saving nozzle can effectively prevent the accumulation of dirt, eliminate the possibility of bacterial breeding, and effectively protect human health while saving water, saving energy and protecting the environment.