Sign In/Sign Up Search
Home / News / How to Fix A Stiff Faucet Handle That Hard to Turn
Back

How to Fix A Stiff Faucet Handle That Hard to Turn

View Count:140 CategoryNews

How to Fix A Stiff Faucet Handle That Hard to Turn

Fixing a stiff faucet handle that is hard to turn is a common household task that can save you from the annoyance of a difficult-to-use faucet and prevent further damage. The process is relatively straightforward and requires some basic tools and a little patience. Here’s a detailed guide on how to fix a stiff faucet handle.

1. Gather the Necessary Tools and Materials

Before you start, make sure you have the following tools and materials:

  • Adjustable wrench or a basin wrench
  • Phillips and flathead screwdrivers
  • Allen wrench (hex key) set
  • Pliers
  • Penetrating oil (like WD-40)
  • Plumber’s grease or silicone-based faucet lubricant
  • Old toothbrush or small wire brush
  • Clean rags or paper towels
  • Replacement parts (if needed)

2. Turn Off the Water Supply

Before you begin any repair work on a faucet, it’s crucial to turn off the water supply to avoid any potential flooding or water damage. Locate the shut-off valves under the sink and turn them clockwise until they are fully closed. If you can’t find individual shut-off valves, you may need to turn off the main water supply for your home.

3. Drain the Faucet

Open the faucet to let any remaining water in the pipes drain out. This step ensures that you won’t have water spraying everywhere when you disassemble the faucet.

4. Remove the Faucet Handle

The method to remove the faucet handle depends on the type of faucet you have. Generally, you can follow these steps:

  1. Look for a decorative cap or cover on the handle. This cap may hide a screw underneath. Use a flathead screwdriver to gently pry off the cap.
  2. Once the cap is removed, use a Phillips screwdriver or an Allen wrench to unscrew the handle screw.
  3. After removing the screw, carefully pull the handle off the faucet. If it’s stuck, you can wiggle it gently or use penetrating oil to loosen it.

5. Inspect and Clean the Handle and Cartridge

With the handle removed, you can inspect the internal components. Look for any signs of corrosion, mineral build-up, or damage. Use an old toothbrush or a small wire brush to clean the handle and the cartridge (the valve mechanism inside the faucet).

If you notice any severe corrosion or damage, you might need to replace the cartridge. You can find replacement cartridges at most hardware stores, and it’s essential to get the correct type for your faucet model.

6. Lubricate the Cartridge

A common cause of a stiff faucet handle is a lack of lubrication. Apply a generous amount of plumber’s grease or silicone-based faucet lubricant to the cartridge. Make sure to cover all moving parts to ensure smooth operation.

7. Reassemble the Faucet

Once everything is clean and lubricated, reassemble the faucet in the reverse order of disassembly:

  1. Place the handle back onto the cartridge.
  2. Insert and tighten the handle screw with a Phillips screwdriver or Allen wrench.
  3. Replace the decorative cap or cover.

8. Turn On the Water Supply

After reassembling the faucet, turn the water supply back on. Open the shut-off valves under the sink by turning them counterclockwise. Once the water supply is restored, turn on the faucet to check for smooth operation and leaks.

9. Test the Faucet

Turn the faucet handle back and forth to ensure it moves smoothly. If the handle is still stiff, you may need to repeat the lubrication process or consider replacing the cartridge entirely.

10. Preventive Maintenance

To prevent future issues with a stiff faucet handle, consider the following maintenance tips:

  • Regularly clean and lubricate the faucet handle and cartridge.
  • Avoid using excessive force when turning the faucet on and off.
  • Install a water softener if you have hard water to reduce mineral build-up.
  • Periodically check for leaks and address them promptly.

Troubleshooting Common Issues

Handle is Still Stiff After Lubrication

If the handle remains stiff after lubrication, it may indicate a more severe issue with the cartridge or internal components. In this case, replacing the cartridge might be necessary. Refer to your faucet’s manual or consult a professional plumber for assistance.

Faucet Leaks After Reassembly

If you notice any leaks after reassembling the faucet, double-check that all components are correctly aligned and tightened. Ensure the cartridge is seated properly, and the handle screw is secure. If the leak persists, you may need to replace worn-out washers or seals.

Difficulty Removing Handle

If you have difficulty removing the handle due to corrosion or mineral build-up, apply penetrating oil and let it sit for a few minutes before attempting to remove the handle again. You can also use pliers for additional leverage, but be careful not to damage the faucet.

When to Call a Professional

While fixing a stiff faucet handle is typically a DIY-friendly task, there are situations where it’s best to call a professional plumber:

  • If you’re unsure about the type of faucet or cartridge you have.
  • If you encounter significant corrosion or damage that requires specialized tools or skills.
  • If the faucet continues to have issues after multiple repair attempts.

Conclusion

Fixing a stiff faucet handle that is hard to turn is a manageable task that can be accomplished with some basic tools and a bit of know-how. By following these steps, you can restore your faucet to smooth operation and extend its lifespan. Regular maintenance and prompt repairs will help keep your faucet in good working condition, saving you time and money in the long run.

https://www.wowowfaucet.net

您好!Sign In

Click here to cancel the reply

    Cart

    X

    Viewed

    X